The products are made of special stainless steel, environment-friendly brass and other materials, which are corrosion-resistant and oxidation-resistant, comply with the latest RoHS 3 and reach standards, and can meet the needs of different domestic and international markets at the same time.

The product is used for the driving mechanism of large-scale riding mower. The applicable vehicle weight can reach more than 280kg, the maximum speed can reach 10km / h, and the maximum climbing angle can reach 15 °. The internal temperature sensor and controller can be configured according to the demand. The speed ratio of reducer can be 13.5g, 20g, 24g, 29g, etc. Protection grade IP54, fearless for most driving environments.

The product is used for the driving mechanism of large-scale riding mower. The applicable vehicle weight can reach more than 280kg, the maximum speed can reach 10km / h, and the maximum climbing angle can reach 15 °. The internal temperature sensor and controller can be configured according to the demand. The speed ratio of reducer can be 13.5g, 20g, 24g, 29g, etc. Protection grade IP54, fearless for most driving environments.

The output shaft size can be customized Deep installation holes ensure firm and reliable installation

The product surface is made of high weather resistant plastic powder, with grade 1 adhesion, neutral salt spray resistance and damp heat resistance test for more than or equal to 500 hours.

Applicable to: intelligent mower traveling motor Brushless DC motor, outer diameter Φ 42

AGV is characterized by wheeled movement. Compared with walking, crawling or other non wheeled mobile robots, AGV has the advantages of fast action, high work efficiency, simple structure, strong controllability and good safety. Traditional AGV uses electromagnetic guidance, tape guidance, optical guidance and other methods to set up its travel route. The path is single and suitable for fixed operation process, which can not meet the needs of modern logistics system.

As the driving motor of solar tracker, the product is composed of planetary reducer, motor body and double protective shell, with a bearing torque of 300nm. The product surface adopts a special anti ultraviolet coating, with a protection grade of IP66 or above and an environmental resistance grade of iso12944-5 - C4. It is suitable for harsh weather and environment occasions such as seashore, desert and plateau, and the product design safety factor is 1.4 times.

The whole series is independently researched and developed. The voltage series is 24V, 48V, and the power range is 360W, 500W and 800W. There are classic models, disassembly free models and valve block models to choose from

The rated output torque is 18.5nm and the maximum breaking torque is 60NM. It can be used with encoder, resolver, etc; The product adopts external carbon brush design, which can replace the brush independently to prolong the service life of the product.

It can be used with different speed requirements. According to the door weight on different occasions, it can provide 25W and 30W power motors or customized development services.

The DC motor for the sliding door needs frequent forward and reverse switching, which requires high mechanical strength and long service life of the reducer.

Compared with axial reduction motor, transverse JC series reducer can bear greater output torque, and the hollow installation mode of output shaft is more flexible

Linix reducer has good mechanical strength (anti kick), low temperature rise and high torque of brushless motor, and large power density per unit volume. It is suitable for all kinds of applications.

功率范围60w-200w，具体功率及RV减速机可根据客户使用工况定制。

Lianyi motor's wheelchair motor solution has a series of solutions with weight from 250lbs to 450lbs and speed from 6kph to 12kph.